Ask Experts Questions for FREE Help !
Ask
    bulljockey's Avatar
    bulljockey Posts: 5, Reputation: 1
    New Member
     
    #1

    Jul 22, 2008, 11:26 AM
    Installing new thermostat
    We are trying to install a newer thermostat. The old one has several wires about 8 or 9. the new one only has 4 or 5 terminals. What do I do with all the extra wires.
    Old wire colors 2 reds, 1 green, light green, blue, white, brown, yellow
    adam_89's Avatar
    adam_89 Posts: 1,866, Reputation: 280
    Ultra Member
     
    #2

    Jul 22, 2008, 11:49 AM
    What are you trying to install a thermostat in?
    bulljockey's Avatar
    bulljockey Posts: 5, Reputation: 1
    New Member
     
    #3

    Jul 22, 2008, 11:58 AM
    Sorry got ahead of myself. Cental ac/heat. Not sure what old model is but new one is hunter 40035A
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Jul 22, 2008, 12:21 PM
    You probably have the wrong thermostat. If you have a heat pump you probably have the wrong thermostat.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #5

    Jul 23, 2008, 07:03 AM
    Sorry got ahead of myself. Cental ac/heat. Not sure what old model is but new one is hunter 40035A

    Not only do you have the wrong tstat,, you have the wrong brand,, get something (almost anything ) besides a Hunter,, junk,junk,junk

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing a thermostat [ 1 Answers ]

When you put a new thermostat in is it easy to install do you just put the green wire were the g is and the red wire were the r is and so on?

Installing a New Thermostat [ 3 Answers ]

I am replacing a thermostat on a carrier a/c heat pump unit model # 40AQ036330EH. The new hunter digital thermostat I choose works fine with A/C, But when I switched it to heat, the unit runs constantly. I have tried resetting the thermostat to default settings to no effect. I cannot locate a...

Installing a new thermostat [ 3 Answers ]

My old thermostat is a Carrier and says "Heat Pump System Control" it does not have a model # and is probably 20 years old. I have a new thermostat which is a LUX TX9000. I removed the old thermostat and there are eight wires all of which are connected They are as follows: w2 - Brown ...

Installing a thermostat? [ 2 Answers ]

Hello, I'm trying to install a thermostat for a heat convector... There are three wires entering the box. 1 is from the power sourse, the 2nd goes to a plug and the third wire, I imagine goes to the heat convector. How do I connect to my new honeywell, two wire connection thermostat? Do I...

Installing a two wir thermostat [ 2 Answers ]

I am tryig to install a two wire thermostat in a mobile home. The wires are not marked. It is a manual 24 volt thermostat with markings G,Y,W,RH,B,O,RC with RH and RC already connected. It is a red and white wire going to the blower that connect red to red and white to green. Please HELP!:confused:


View more questions Search