Ask Experts Questions for FREE Help !
Ask
    Alipet8's Avatar
    Alipet8 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 17, 2008, 01:44 PM
    GFI outlet issue
    I bought my home in May 2008. During the inspection it was required that the previous homeowner install GFI outlets in both bathrooms. She did this and everything worked fine. However, several days ago the outlets in both bathrooms quit working and I can't set them to work again. Any idea why this would be happening or how to fix it? The outlets are new so it would be strange if they already wore out.
    Thanks!
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jul 17, 2008, 02:26 PM
    Unplug everything, check to see that the circuit breaker is not tripped then try to reset the GFI's. They will not reset if the breaker has tripped. If they will not reset you will then have to try to determine why not. GFI's can be very sensitive and do fail. However, it would be very unusual for both to fail at the same time. Depending on how they are wired, one can cause the other to trip off.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #3

    Jul 17, 2008, 02:41 PM
    I'd be willing to bet the home inspector had very little clue and did not know that the receptacles were already GFI protected. He probably never even checked that.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #4

    Jul 17, 2008, 02:54 PM
    I wouldn't bet against you. I'd probably lose. Not only that I have a real problem with someone who probably took a two week course on paper work being taken seriously.

    What's more (if I understand the code correctly) if the house was wired prior to GFI's there is no legal requirement to upgrade. Not a bad idea but not a requirement.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #5

    Jul 17, 2008, 03:09 PM
    Before they made the GFI testers readidly available, I used to take the 2 probe of a "Wiggy", and touch 1 probe to the Ground, and the other in the Hot(small prong), If it lost power, it tripped, and was GFI protected.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Convert Electric Dryer outlet to regular outlet [ 8 Answers ]

I just bought a gas dryer, leaving a funky 3 pronged outlet unused. The outlet was connected to the fuse box as a single circuit and I would like to let the new gas outlet take advantage of this. Is there any problem replacing the 'funky' electric dryer outlet to a regular three pronged outlet,...

GFI outlet issue [ 2 Answers ]

I live in a new home and about a year after moving in, the GFI outlet in our bathroom stopped working. I am in the electrical trade so I do know how to wire components in a home. With that I replaced the faulty outlet about 3 months ago. When it is not being used nothing is plugged into it. I wired...

Electrical outlet issue [ 1 Answers ]

I have a bedroom outlet that is controlled by a wall switch. I would like to make one of the outlet plugs "hot" all the time and the other plug still controlled by the switch. I have checked the wiring at the outlet and there are 3 wires. The back and white are attached to the two screw at the...

Outdoor electrical outlet keeps tripping gfci outlet [ 3 Answers ]

Until just recently my christmas decorations would light up when we plugged them into the outdoor electrical outlet. Now when we plug it in the gfci outlet in the garage keeps getting tripped and the lights won't come on. Even when we reset the gfci, once we plug in the chord it gets tripped...

Must you re-wire outlet to outlet? [ 8 Answers ]

Hi there. Great site. I am rewiring my 1950's house with plaster walls, older wiring had no ground. Because it is one story, and extremely tight in the attic on the outer walls, I ran a 12/2 home run for the outlets, to a big (1900?) junction box, then "spidered" out to each individual...


View more questions Search