Ask Experts Questions for FREE Help !
Ask
    ajayjt's Avatar
    ajayjt Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 17, 2008, 08:09 AM
    Replaced Pull Chain Switch - Fan does not stop
    I have hunters FAN. Its pull chain broke so I brought another 4 wire (3 spped fan switch) from Home Depot. I noted the location of existing wired as
    L - Black
    1- Grey
    2- Brown
    3- Green
    I replaced the switch with same color coding of wire. Now the Fan runs only on 2 speed and does not stop at all.
    1st Pull - Full Speed
    2nd Pull - Full Speed
    3rd Pull - Full Spped
    4th Pull - Low Speed
    5th Pull - Full Speed
    ...

    Any help appreciated
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jul 17, 2008, 12:53 PM
    Your replacement switch is not the correct switch. Obtain the correct one from Hunter Fan
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

3-way pull chain fan switch [ 1 Answers ]

Unfortunately the switch came apart (why it needed replacing) so I don't know how to attached the L,1,2,3 to the White, Black, Blue, and Yellow wires. The ceiling fan is from Hampton Bays. Thanks in advance!

Replaced pull chain switch, now fan won't stop turning [ 5 Answers ]

First I want to say thanks for the help so far. I had to replace the pull chain switch in a Hampton Bay fan. I was unsure of the wire configuration and was able to find some helpful information to get me started. I have installed the switch and the fan now works on all 3 speeds, but it will not...

Pull chain switch [ 3 Answers ]

:confused: I was told that I could convert any light fixture to a pull chain light by drilling a hole in the light canopy and connecting a pull chain switch. I did that and got the light to work but it will not turn off with the chain, I have no wall switch. Is this all wrong or have I connected...

Pull Chain switch [ 1 Answers ]

I am wanting to add a pull chain mechanism to a new, hard wired type light fixture. I have purchased a ceiling fan light kit pull chain mechanism. The pull chain mech has red, blue and black wires:eek:. . The fixture has white, black and ground. . How do I wire this up?

Replacing a pull chain switch [ 1 Answers ]

Help! My new pull chain switch has (only) two black wires; how do I connect it to the ceiling wires (one black, one white, plus the ground wire)? Thank you! Willow

View more questions Search