Ask Experts Questions for FREE Help !
Ask
    ksh68's Avatar
    ksh68 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 14, 2008, 11:47 AM
    Fan Works. Light Doesn't
    I have a question about our ceiling fan that was recently installed. It's a Harbor Breeze fan that came with a light kit. The fan works perfectly fine but the light will not go on. To conect the light kit to the fan there is a 9 plug box so to speak that basically snaps together. Both pieces are color coded and yes, I did ensure that the colors on each one matched. The problem is that there is one black wire and one white, both with a white casing on the end that extends from where the pull chain is to turn the light on and off. These wires are connected to nothing and I don't know where they would connect to so that the light can operate. I don't seem to see anywhere that they can connect to.
    ksh68's Avatar
    ksh68 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jul 14, 2008, 12:24 PM
    Got the problem resolved. Seems there were 2 wires that have connectors where the black and the white wires plug into.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Jul 14, 2008, 05:36 PM
    Glad you got it working.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Light works, but very dim [ 41 Answers ]

We just installed a Hampton Bay Edgemont ceiling fan that runs with LED bulbs. The fan works fine, the only problem is that the light is very dim (think night light). Is this normal? If not, is it something we can fix or do we need to return the fan? Thanks for your help!

Remote works, light works, fan humms does not turn [ 2 Answers ]

Hello, I have a Hamton Bay fan with a remote/no pull chain. The light on the remote comes on and does properly operate the light on the fan. It also turns on and off a humming noise but there is no movement from the fan itself. Of course, the house did not come with an owners manual. Is...

Fan works but light doesn't. Fixed and now the light works but fan doesn't [ 9 Answers ]

While I was at college somehow my fan stopped working. There is absolutely no explination from anybody but my mom did get a replacement so I didn't care too much. The fan has a ground from the mount(copper), ground from the middle of the fan(copper), a hot for the light(blue), hot for the...

Bathroom fan/light: light works, fan doesn't [ 3 Answers ]

I'm back with more "finishing basement" questions. This weekend, I wired my bathroom. This is 20 amp service with 12 ga wire. For the bath fan/light, the power source came into the switch box (1 box, 2 switches) on a 12/2 wire. From there, power goes up to the light/fan on a 12/3 wire. Red goes...

Fan works light doesn't [ 3 Answers ]

Any ideas on a windward II fan/light combo remotely controlled. I have changed batteries in remote, checked bulb and got a new bulb, when Press the light button on remote I get the light display and brightness but no light comes on. I was wondering if it might be the ballast, It is a 9"...

View more questions Search