Ask Experts Questions for FREE Help !
Ask
    okaussie's Avatar
    okaussie Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 12, 2008, 01:41 PM
    Sqeeking GE dryer
    I have a GE model no. DVL233EB4WW that is making a terrible high pitched squeaking noise. Does anyone have an idea of what might be causing the dryer to make this noise? THanks for your input.
    walterhouse's Avatar
    walterhouse Posts: 2, Reputation: 1
    New Member
     
    #2

    Jul 12, 2008, 02:38 PM
    Hello,

    I have a GE dryer also but don't know number right now--- mine had squeeking noise in the past, found that the blower fan was shifting (to front/ and/or back) can't remember exactly which way but removed front panel and moved shaft holder on blower to reposition it and the squeek stopped.

    Hope this helps walterhouse
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
     
    #3

    Jul 12, 2008, 04:14 PM
    Squeaking normally indicates a problem with either the teflon gliders (replace gliders), with the plastic rollers (replace rollers), or with the drum bearing (replace dryer). You can not economically replace the drum bearing.

    You have to do a little research here.

    To check what is going on in your dryer :

    Remove the rear panel, and have a look as to what is going on.
    Check the drive belt : is it frayed?
    Is the drum running against something?
    Does anything look lose or broken?

    Please be careful : do not touch anything while the dryer is connected to the power.

    If you can not find anything, remove the power - take the power cable out of the socket and put it on to the ground.
    Note down how the belt is connecting the drum and motor.
    Remove the belt (by taking away the tension from the belt this is easy).
    Spin the motor a couple of times by hand, as fast as possible. Is it running freely? No squeaking?
    Spin the (empty) drum a couple of times by hand, as fast as possible. Is it running freely? Is it squeaking? If so check the teflon "gliders" between the drum and the door window, or the plastic rollers holding the drum horizontal at the front.
    If these are OK, than check the drum bearing.

    Of course you can also come back to the board and discuss your findings!
    If necessary contact me by private mail (click on my handle and follow instructions) to draw my attention.

    Success !

    :)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag neptune dryer sqeeking. [ 2 Answers ]

I have a Maytag Neptune dryer that is sqeeking... It started about a week ago and keeps getting louder and louder... my husband thinks it's just the belt... Anyone have a clue what could be wrong?

Tumble Free Non-Heated Dryer Rack for HE2 Dryer [ 1 Answers ]

I can't seem to figure out how to use the rack

Would a clogged dryer vent keep a dryer from turning on? [ 1 Answers ]

I have a relatively new GE stack W/D - would a clogged dryer vent keep the dryer from turning on? Does it have a sensor to keep it from turning on if it senses a blockage?

Kenmore Stackable Dryer/Washer Dryer Squeaks [ 1 Answers ]

We have developed a squeak in the dryer. It does heat okay and clothes are tumbling well. I went online to get the schematics of the dryer drum, but would not know where to start as parts are numbered and not named. Help:confused:

Dryer dial won't spin and dryer won't shut off [ 2 Answers ]

Kenmore 90 series dyer... where ever you set the timer dial, it stays put and never shuts off automatically. You have to turn if off manually. The dryer ran all night last night and continues to have the problem today. My question... can we fix the dial ourselves or do we need a repair guy? And...


View more questions Search