Ask Experts Questions for FREE Help !
Ask
    4sugarfoot's Avatar
    4sugarfoot Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jul 12, 2008, 01:27 PM
    How to fix my weed trimmer
    July 11, 2008

    I have a ""WeedEater" gas trimmer.

    Model: FX25; Serial No. 03122N501-1886-2
    Purchased : 10 months ago.

    PROBLEM: Cannot start engine.
    The primer bulb will not fill-up with gas when priming and there no sign of a kink
    Or hole in the gas line, tank or the primer bulb.

    (PS) Will start for a second after pouring a very little gasoline into the spark plug opening.

    Thank you;
    Richard Bonner

    [email protected]
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Jul 13, 2008, 06:44 AM
    The filter may be clogged. And then there may be a small pin hole you don't see.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Weed Trimmer(weed eater) [ 3 Answers ]

I need step by step help on re-installing a (recoil) starter rope on a weed eater. If by chance you have diagram of how to put it on , I sure would appreciate it , any info will be appreciated ty denise

Weed Eater Trimmer [ 1 Answers ]

I have a Weed Eater brand yard trimmer that will start but will not stay running what will fix this problem

String Weed Trimmer [ 1 Answers ]

I have string weed trimmer - model is Weedeater XT 12, which I inherited, therefore no owners manual. I need to put new string on. I got the cover off, but can't figure out how to load the string so it feeds correctly. Help!

Replacing the spool of string on a weed trimmer [ 3 Answers ]

I am having a problem replaceing the spool of string on my craftsman weed eater.

Weed Eater trimmer [ 4 Answers ]

The gas motor on my weedeater became unstable in it's running. After trying to readjust the carb I noticed the gas line was cracked and leaking at the tank. So I have now replace the gas line, cap, and cleaned the filter in the gas tank. Also have disassembled the carb and cleaned out the gas...

View more questions Search