Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling light on makes ceiling fan turn off
[ 6 Answers ]
I installed 2 ceiling fans yesterday in two separate and am having the same problem with both. Before I removed the old fans I disconnected 1 wire at a time from the ceiling to see what stopped working. So I think one wire is the neutral and made both light and fan stop working, 1 wire was for...
Stuck string on ceiling fan/light combo light side
[ 1 Answers ]
I have a ceiling fan/single light combo, and the pull string to switch on the light is stuck... How do I dismantle the light fixture part to get at the string?. Will I need to replace anything inside?
Hampton Bay ceiling fan with remote controller
[ 5 Answers ]
I just installed a HB ceiling fan with light package and purchased a separate remote controller. The fan portion seems to work fine and responds to the remote, but the light is not. The light will only come on very dim, like there is very little power getting to it. If I only run one bulb, it is a...
Installing a light kit on a ceiling fan where a switch enables both fan and light
[ 2 Answers ]
I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ...
Hampton Bay ceiling fan works great... Until I add the remote controller unit.
[ 3 Answers ]
Hi, I'm the "proud" owner of a Southwind V ceiling fan. I'm a pretty cautious person by nature so when I installed the ceiling fan I left out the optional remote controller piece to make sure all works well. Blue and black fan wires to the black wire in the wirebox, and white on white (grounds... View more questions Search
|