Ask Experts Questions for FREE Help !
Ask
    Zaney71's Avatar
    Zaney71 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 8, 2008, 10:24 AM
    PVC glue on ABS pipe
    I glued my ABS pipe with PVC glue... will it be OK
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
     
    #2

    Jul 8, 2008, 04:56 PM
    That depends -- You should be all right if you used a blue PVC cement, this is typically 'hot' enough to assure a decent 'solvent-weld'.

    OTOH, if you used a clear PVC cement, then you're going to need to cut it all out and start over.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #3

    Jul 8, 2008, 05:16 PM
    What did the can say on it, if AllPurpose then you're fine.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removing glue [ 2 Answers ]

How do I remove the glue on my bathroom floor left from the vinyl floor tiles that I am taking up from my bathroom floor?

Appropriate glue [ 13 Answers ]

I have been doing a craft project that I need to glue a coiled piece of 20 gauge wire to the handle of cutlery (stainless steel) I cannot seem to find a glue that will hold. Please advise.

Using pvc with glue wiped off ? [ 3 Answers ]

I was trying to glue a 3 in pvc tee and could not make the connection.I immediately wiped off the glue from both ends without joining them, can I reuse the tee?

I need glue for the body [ 1 Answers ]

I'm doing a photoshoot for school. And I need to know what glue is the best and where can I get it. I'm glueing little pieces of mirror-type-glass on my models body. Help!


View more questions Search