Ask Experts Questions for FREE Help !
Ask
    Shiloh x's Avatar
    Shiloh x Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 7, 2008, 09:20 AM
    Dripping Delta tub faucet
    I have a dripping tub spout that I would like to fix. It is a Delta Monitor, single handle style. I figure I have to pull and replace the valve stem, but have no idea how. The stem looks like it is tightly integrated with the plastic sleeve that surround it. Also, am I correct on the part to replace? Any help would be appreciated.
    Attached Images
     
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Jul 7, 2008, 10:44 AM
    Hi Shiloh

    After turning the water off to the house (of course), undo the chrome ring and the cartridge will slide out. There are o rings inside that you can replace. You may find a Delta repair kit at Home depot or lows plumbing supply for that model number. Or take the cartridge with you for an exact match.

    Also all Delta faucets today have a lifetime warranty against dripping or finish coming off. This means if you call Delta customer service at 800-345-3358 and they will send you the repair parts for free as long as you are the original purchaser, good luck

    John
    lythanhman's Avatar
    lythanhman Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Sep 29, 2012, 11:31 AM
    "T his means if you call Delta customer service at 800-345-3358 and they will send you the repair parts for free as long as you are the original purchaser, good luck "

    I had same problem and Delta customer service is still terrifically works. After asking for my name and address, they send me the repair cartridge free of charge. I build the house in 2003 and today is 9/30/2012. You don't need any luck to deal with Delta.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #4

    Sep 29, 2012, 11:46 AM
    Hi lythnhman and welcome to The Plumbing Page at AskMeHelpDesk.com
    We thank you for the information. Very helpful./ Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to replace 'O' rings and Gaskets in Delta Faucet [ 1 Answers ]

My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you

Delta Shower faucet [ 1 Answers ]

I have adelta shower fct. That recently change the inside washers, put now I don't have any pressure coming out. What is wrong?

Delta faucet drips [ 1 Answers ]

How do I stop my bathtub faucet from dripping?

Delta two handle faucet [ 1 Answers ]

I have a Delta two handle knob faucet in my bathroom. It had a very irritating leak so I purchased knew knobs and replacement parts at Lowe's. I replaced everything down the seats and springs... (except I think what's called the stem) At first, when I turned the water supply back on, the water...

Delta Faucet in Tub [ 4 Answers ]

Sorry for the multiple questions in the same day, but I am at a loss to explain what is going on with my tub's faucets. Currently the cold water side will not stop dripping. I have replaced the stem, the seat on the hot cold and diverter, but it continues leaking. I realize after doing this a...

View more questions Search