Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Blower motor of Trane XE80 furnace won't start
[ 8 Answers ]
I have a Trane XE80 gas furnace. The purge motor and burner go on, but main motor won't run. LED flashing light flashes continuously when burner is on however, when the burner shuts off, the LED light flashes 4 times at an interval. I tried to look for a reset button on the main blower motor but...
Trane XE80 Blower Motor Kaput
[ 2 Answers ]
Had an AC salesman out today about replacing the upstairs unit. He was demonstrating "proper air flow" with the basement unit. He opened the furnace and the blower motor made a squealing noise when it came back on. He flicked the power off and then on again and the noise disappeared. He said it...
Running blower at slow speed all the time, and high when compressor runs.
[ 1 Answers ]
I have a Carrier 58PAV090 furnace air handler. The fan has multiple leads which are used to run the blower at different speeds. The black is for High speed, yellow for medium high, blue for medium low and red for low. In the cooling mode, the blower turns on when the thermostat calls for cooling...
Trane XE80
[ 1 Answers ]
My 10 year old Trane XE80 in my woodworking shop lately cannot put out enough heat to satisfy the thermostat, which yesterday was set at 72 degrees on a 37 degree day. The steel building is completely insulated, and this has never happened before at this outside temperature. The furnace seems to...
Cooling: blower runs but compressor does not start
[ 3 Answers ]
I have a heat pump outside and a blower in the attic. Both made by YORK. My system stopped cooling a week ago. The blower keeps running but the heat pump does not start. I checked the circuit breaker in the basement and the power disconnect next to the outdoor unit. Both are good. I studied... View more questions Search
|