Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding pergola to existing deck
[ 9 Answers ]
I have a 12' x 16' deck. Construction is 2x10 ledger attached to house and two 2x10 beams sandwiched around three 6x6 posts (posts are set in concrete piers 4' deep). The beams are set in (cantilevered) about 15" from the outside edge of the deck. The joists are 16" on center and are 2x8's. ...
Adding A Cantilever Extension To An Existing Deck
[ 1 Answers ]
I think I made a mistake when I tried to post this the first time so I apologize in advance for any duplicate. I would like to add a 2' cantilevered extension to an existing deck which is 9 1/2' wide, 45' long and 4' ~ 10' of the ground. The builder attached a 2" x 10" ledger to the cottage,...
Adding hand rail to existing deck
[ 2 Answers ]
We have a 2 year old composite deck that is 16x16. We need to add hand rails and stair rails. Any suggestions on the easiest way to go about this? Thanks! Jaimie
How to level mower deck
[ 1 Answers ]
On a Craftsman Garden Tractor (22.0 HP), how do I level the mower deck?
Existing no ground wiring and adding new.
[ 1 Answers ]
I currently have a two gang switch box where there is an original non-grounded circit running to one of the switches. I am adding a new circit and switch to this box which of course has a ground, do I pigtail all the ground wires together and run one of the tails to the grounded switch (circuit)... View more questions Search
|