 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
There may be filter insert at the solenoid valve, where your incoming water flex pipe connects to. Unscrew the bottom kick plate, unscrew the water supply and see if you can see the filter. If dirty, remove it, clean it and reinstall.
Other than that make sure water is coming through your supply line all the way to the D/W. Check if your D/W is plugged in and its breaker is in ON position in service panel. If you have pig tail elec. Connection between D/W and wall, and it is plugged into GFI receptacle, make sure it is not tripped. It is a good practice to trip it manually and reset it. Otherwise, you may be in need of appliance service call. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Kenmore 66516712000 dishwasher. Tonight my daughter's bathtub was on the counter above it and the seam cracked letting a baby bath full of water drip down the counter and into the dishwasher. Now it has various lights blinking (Cancel is on, and turns on though I did not ask it too) ...
We have a 2.5 yr old kenmore (ultra wash quiet guard4) dishwasher that has the clean light flashing green and will not work. We could obviously see the heating element was broke- we replaced that and it is still not functioning. Is there a reset button> What else could the flashing green light...
We have a Kenmore Dishwasher, model #16509200, and it's worked perfect until about 3 months ago, the buttons no longer work. I tried it Christmas day and it worked great, but when I tried it the next day, none of the buttons would work. This morning, I pushed the Air Dry button for 4 seconds just...
Rob
View more questions Search
|
