Ask Experts Questions for FREE Help !
Ask
    Dee865's Avatar
    Dee865 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2006, 06:52 PM
    Printer Problem
    When I print something all this extra paper keeps printing out and will not stop... can you tell me if it is a printer setting issue or give me a clue on how to resolve the issue. Thank you:)
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
    		  
    #2

    Apr 21, 2006, 05:51 AM
    Depends on what you are printing from where. We need more info. Lots of times people don't realize the print area is bigger then what they see.
    Dee865's Avatar
    Dee865 Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Apr 21, 2006, 09:59 AM
    It is just a single hp printer connected to a hp computer. Was working fine until I put a new cartriage in it. I did align it properly too.
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
    		  
    #4

    Apr 21, 2006, 10:17 AM
    This doesn't answer my question about what you are printing from where (meaning what software).
    Dee865's Avatar
    Dee865 Posts: 5, Reputation: 1
    New Member
    		  
    #5

    Apr 21, 2006, 01:13 PM
    Microsoft Office word, e-mail off Yahoo, and articles of the internet. Sorry I am not very knowledgeable at explaining this issue. Thank you for being patient. Any advice is very wecomed.
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
    		  
    #6

    Apr 21, 2006, 01:17 PM
    And the same thing happens no matter what you print from? Sounds like you might have damaged the paper sensor when you changed cartridges.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Printer problem [ 1 Answers ]

My PC recently went very badly wrong and I was forced to use a recovery disc to start all over again. Most things are working properly except for the printer. I am using Windows XP Home and the printer is a Sharp AJ-2200 using Port LPT 1. It was necessary to reinstall the printer but now it...

Problem networking printer [ 7 Answers ]

I just added a new laptop to my home network. It's a Dell Latitude running windows XP pro. I had successfully been using another (IBM running Windows 98) and had it all networked fine, but I cannot get the printer to work with this one. I have tried setting it up tried to install the proper...

Printer Problem - Power Outage [ 2 Answers ]

Good Afternoon, The company I work for recently had a power outage and one of our printers has a message on it. The message reads: Load file and execute. The printer is stuck here. I turn it on and off several times, replaced the jetdirect card and changed the memory. None of which helped. Has...

Printer problem... [ 3 Answers ]

I'm using Epson Stylus C65 it works cause I already used it but when I remove the USB cause I have to insert my scanner, then inserted back the printer and use it "the printer is not ready to print" I wait cause I thought its just a matter of time, I pull it then put it back several times but no...

Network printer share problem [ 1 Answers ]

This is my problem. Have a win NT 4.0 network. Working on migrating windows 2003 server network. Have upgraded 2 computer workstations from win 98 to XP pro. Everything went fine. One machine that was upgraded to XP uses a dos based program installed on the NT server which is shared. It is ACCPAC...

View more questions Search