Ask Experts Questions for FREE Help !
Ask
    vmccaskill's Avatar
    vmccaskill Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 4, 2008, 12:33 AM
    What is the hot wire in a typical 120 volt circuit
    What is the hot wire in a typical 120 volt circuit
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 4, 2008, 02:06 AM
    Usually the black wire is hot wire as you call it. The white is neutral and the green or bare wire is ground.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Jul 4, 2008, 05:03 AM
    Can be any color but green, white, gray or bare.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #4

    Jul 4, 2008, 05:16 AM
    Strat has the only correct answer.

    Don't forget, it can even be white in many existing installations where cable is the wiring method, as is typical in 99% of the homes in the US.
    With straight 240v circuits and 3-way switches it was not always required to re-mark the white as it is today.

    There are hundreds of thousands of perfectly legal and safe 240v receptacles out there fed with "2-wire", just black, white and ground, where NO neutral is required and the black and white are used for the two hots.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #5

    Jul 4, 2008, 09:12 AM
    The hot wire in a typical 120 volt circuit is

    Travelers for 3 way and on up switches is not what I call a typical circuit.

    According to the NEC all conductors have to be identified and this has been in the code almost since its inception.

    Since according to statistics 73% of all electric wiring is not inspected it could be any color at any time. This is why they make meters for testing.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #6

    Jul 4, 2008, 10:01 AM
    I wired a house where the Contractor had only seen black and white wires used. When he seen my boxes with every color available due to Travellers from multiple locations, and numerous things going on. He got mad at me and said "THOSE ARE HIGH RISE AND HIGH VOLTAGE COLORS!".
    I would not say black is typical, more like it is commonly used, as is red.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

240 Volt 3 Wire Service to 4-Wire Receptical [ 4 Answers ]

I am replacing an electrical stove with a new electrical range. The old stove was hard wired with a 3-wire service. I assume 2 hot and a ground). The new range requires a 4-wire receptical (I assume 2 hot, neutral & ground). Can I wire the 3-wire service to the 4-wire receptical? (How do I do...

New 250 volt circuit, no grounding bar in main panel [ 4 Answers ]

Hi, I have searched for this answer but I can't find a clear answer for a rookie. I am adding a 250v/20amp circuit to my main panel for a window air conditioner. I have a newer Murray main panel that was installed by an electrician, but its an old house and all the outlets are 2 prong type. So I...

12 volt circuit in Travel Trailer [ 2 Answers ]

In my small Trailer I have three 12 volt circuits coming from the power center. One circuit blows the fuse as soon as the battery is connected. I thought I had a short somewhere in this circuit so a placed a test light in place of the fuse and thought that with everything on that circuit shut...

240 volt four wire in 240 three wire outlet [ 1 Answers ]

I have a generator that has (2) 20 amp 110 outlets and (1) 240 outlet. The 240 outlet have receptacle for four wire plug but I want to use it in a three 930 wire 240 volt plug at other end. Is this a workable solution?

View more questions Search