Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Bathroom water pressure vey poor from cold water storage tank
[ 1 Answers ]
Bathroom toilet is very slow to fill up also cold water tap in bathroom when turned on has little or no water coming out of it.can you reply staight away please.
Low cold water pressure
[ 1 Answers ]
We have a well water system. Strong pressure from water hose (tied in directly to water line leading to house) and strong hot water pressure. Cold water started to slow about 6 months ago. Now it barley trickles through the whole house. We believe there are no leaks be cause pump does not run all...
Lost Hot Water Pressure but Cold Water is fine
[ 1 Answers ]
Hi, We had a flood in our laundry room earlier today when the aquarium I was siphoning into the nearby sink started to siphon onto the floor instead (the hose came out of the sink and was draining water onto the floor). I didn't realize this, and suspected a leaky pipe when I saw the water...
No water to both sinks / very low cold water pressure to bath and washer
[ 1 Answers ]
My kitchen and bathroom sink have no water, period. Hot water seems to be pretty good to the bath and washer but cold water to those 2 locations are very weak. The outside faucet is very weak at best. I have had this problem for quite some time so it's not the fact that they are frozen. I just... View more questions Search
|