 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Unsure How to Operate Maple Chase Thermostat
I am unsure how to operate my Maple Chase thermostat because I do not have a manual.
1) Should I have the air conditioning in the COOL and AUTOMATIC or COOL and ON position? 2) Also, how do I stop the thermostat from blinking with data? 3) How do I set the time? 4) Do you have a phone number I can call? Thanks... Adilah Barnes |
||||
|
||||
|
1) Should I have the air conditioning in the COOL and AUTOMATIC or COOL and ON position
if you want it to cool= set it on cool and automatic and the fan should cut off as the a/c cuts off. If you want the indoor fan to run all the time set it on cool and fan on. as for the other questions you will need the model number when you contact a dealer that sells Maple chase and they might can help you,I looked and couldn`t find you any help online,, goodluck |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I let the batteries run low on my thermostat. I just replaced them but the display still reads "lo bat" and the heat does not kick on. I checked the fuse and it is still intact. Please help!!
Our Maple Chase thermostat is about 7-8 years old and recently, it seems to be reading off the wrong house temperature. Last night, the thermostat was reading 75 degree F but the house was too cold to be anywhere near the temperature. So my husband raised the temperature to 76 degree F and...
Recently my heater turns on irreguarly - one day it will work, another day it may quit. The Heater is Bryant Model 580A packaged gas/electric unit. I have a Maple Chase thermostat in the house. It is about 16 years old. I have someone replaced a new ignition module about two months ago. What may be...
View more questions Search
|
