Ask Experts Questions for FREE Help !
Ask
    pipemaster17's Avatar
    pipemaster17 Posts: 11, Reputation: 3
    New Member
    		  
    #1

    Jun 30, 2008, 01:30 PM
    Washer only filling 1/2 full on rinse cycle
    I have a coin-op washer model CA2742TQO that only fills 1/2 full on the rinse cycles, but fills full on the wash cycle. Any suggestions?
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
    		  
    #2

    Jul 1, 2008, 01:40 AM
    Get an operators manual and read if that is perhaps the "normal" operation of the machine !
    You did not mention that what you notice is a sudden change of operation.

    Try any of the following Sears links :

    Sears on-line website

    http://www.sears.com/Service

    http://www.searspartsdirect.com/partsdirecta

    http://www.searspartsdirect.com/partsdirectb

    Success!
    As always : if you require more info, please let me know. If this solves your problem, please rate the answer provided! Feed back is always appreciated!

    ;)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Washer Won't Fill on Rinse Cycle [ 2 Answers ]

Everything else is working fine, it fills normal on wash, but not rinse, no matter what cycle such as perm press, ultraclean.

Washer does not switch to rinse cycle [ 1 Answers ]

My Whirlpool washer goes through to the rinse cycle and then stops. If I turn dial into the rinse cycle zone it then continues. Does it sound like the timer has gone bad?

Washer won't run the rinse cycle! [ 4 Answers ]

Does anyone have any idea what's wrong? Actually, no cold water is coming into the washer and YES the valve is open. Since there is no cold water... no rinse cycle. I have to rinse my clothes by starting it over and fill it with hot water.

Washer in basement backing up on rinse cycle [ 1 Answers ]

Moved into a house recently. Finally really happy to have a washer. On the rinse cycle it overflows onto the basement floor through the vent in the floor. Maintenance guy came over today and says it is probably lint clogging the line. He pours a quart of lime into the pipe that the washer drains...

View more questions Search