Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Variable Speed vs. Single Speed Blower
[ 1 Answers ]
Questions: Getting 2 new heat pump systems installed. 1.5 ton upstairs and 4 ton downstairs. Decided on Comfortmaker. Heat Load calc performed on sizes. Going 2 stage with variable speed downstairs with Honeywell IQ Pro stat. Was going to go one stage with variable speed upstairs with...
Retrofit variable speed fan motor into air handler
[ 1 Answers ]
I have separate independent heating and cooling systems: oil-fired HW baseboard heat and central air. I presently close off the AC vents in the winter to avoid downdraft from the attic-based ducting system (whole AC distribution is in attic). I've heard that it would improve efficiency and...
Thermostat: variable speed blower
[ 1 Answers ]
I recently had a 2-stage, variable speed Amana furnace installed... but they left the original (single-stage) thermostat. I'm now thinking that I'm not getting the advantages from the variable speed blower.. Can anyone suggest a thermostat for my installation?
Replace air handler with variable speed
[ 1 Answers ]
I want to know if I can replace a standard air handler on a 5 ton system with a variable speed air handler without replacing the outside unit. The electronics on the air handler will be different but does the compressor work full time or not.
Prob. Variable Speed Air handler
[ 2 Answers ]
A Trane XL14i heat pump was installed 6/8/05. The variable speed air handler fan only runs at full speed or off, but not slow when demand is low. The dealer's tech has replaced 2 electronic modules, to no avail. He can't seem get expert advice from Trane. I would greatly appreciate any advise to... View more questions Search
|