Ask Experts Questions for FREE Help !
Ask
    log's Avatar
    log Posts: 93, Reputation: 2
    Junior Member
    		  
    #1

    Jun 27, 2008, 06:15 PM
    Type of thermostat for a 94 jeep grand cherokee ltd
    Is more than one type of thermostat??
    If so ,which type of thermostat is the best one for a 1994 jeep grand cherokee ltd. (one that will keep it cool ):rolleyes:
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jun 27, 2008, 06:37 PM
    Since you didn't provide what engine you have, consider going with a 160 degree thermostat; e.g. the Stant below:

    While we find your parts, please enter your ZIP Code at PartsAmerica.com

    Obviously, you need to get the correct part no. for your engine.
    log's Avatar
    log Posts: 93, Reputation: 2
    Junior Member
    		  
    #3

    Jun 27, 2008, 06:41 PM
    My bad... its a 94 jeep grand cherokee ltd 4.0l -inline 6 cylinder
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Jun 27, 2008, 06:45 PM
    Looks like the one above is correct.
    log's Avatar
    log Posts: 93, Reputation: 2
    Junior Member
    		  
    #5

    Jun 27, 2008, 06:53 PM
    K ill try that out thanks a lot
    ... and when installed it's the spring toward the engine right?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #6

    Jun 27, 2008, 06:58 PM
    Yes, and install with pin up. Seal (thermostat mounting rubber) goes over the thermostat.
    log's Avatar
    log Posts: 93, Reputation: 2
    Junior Member
    		  
    #7

    Jun 27, 2008, 07:37 PM
    I didn't follow that pin thing or the rubber part... can u please explain!
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #8

    Jun 27, 2008, 07:40 PM
    If you see a pin on the periphery of the thermostat, it should face up. There might even be a cutout on the thermostat housing cluing you in. Install the thermostat first, place the gasket on top of the thermostat, then position the housing cover.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

93 jeep grand cherokee [ 4 Answers ]

I just got a cherokee and it did not come with a manual... my question is where can I find a diagram for the fuse box? Also, the running light in the back does not work and I have tried new bulbs they won't work in it either, what should I do to get it fixed? Not trying to get pulled over for...

1993 Jeep Grand Cherokee [ 2 Answers ]

I plan to replace the valve seals in this jeep, it is a 4.0 liter. I want to re-verify which is the exhaust and the intake valves. Looking from the passenger side of the car which is the first valve? Or am I SOL until I pull the valve cover?:o

Leaking from the thermostat(94 jeep grand cherokee ltd) [ 1 Answers ]

:confused: OK well I have recently been having problems with the cooling system as I have changed the water pump and the thermostat.. now when it overheats it starts to leak from where the thermostat is located anyone know the problem?. oh and from a 1994 jeep grand cherokee ltd. 4.0l...

Air bag light - 99 jeep grand cherokee [ 2 Answers ]

We have a 1999 Jeep Grand Cherokee. When we are driving the air bag light comes on and off several times. Anyone know why?

View more questions Search