Ask Experts Questions for FREE Help !
Ask
    ddcowens's Avatar
    ddcowens Posts: 5, Reputation: 1
    New Member
     
    #1

    Jun 23, 2008, 12:27 PM
    Dry wall
    I just tore down the wall in my bathroom. I put up waterproof backerboard around the tub surrounding area, and would like to know what is the right type of wall board to put up on the outside wall of the tub?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jun 23, 2008, 02:48 PM
    I prefer to use moisture resistant green board in the non shower/tub areas of a bathroom. It cost a little more, may not be necessary but it's what I like to do.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Jun 23, 2008, 03:21 PM
    Hey all:

    Hi guys:

    In my area... at home depot they are now selling DENSARMOR MOISTURE and MOLD resistant wall board that they say is superior to the older greenboard. Same price as greenboard, too...

    Here is just one website that discusses it:

    http://www.gp.com/build/product.aspx?pid=4659

    They don't even sell greenboard in my area anymore Harold... ;)

    Anyway, just FYI... let me know what you think guys!

    MARK
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #4

    Jun 23, 2008, 04:13 PM
    Well you know how us southern boys are, a little slow on the uptake. Heck, we still using tar paper.
    How you fellas doing on that big hole you been digging for the last 100 years. Heard that you tried to dig half a hole but it didn't work.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #5

    Jun 23, 2008, 04:16 PM
    Dug half a hole and paid for it twice... I swear!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Running in wall Coaxial Cable from Existing wall [ 7 Answers ]

Hi there, Is there someone here who is expert on electrical? I need help on running coaxial cable to my existing walls. I have a 1st floor where I have access to drilling holes into the second floor. I am willing to cut open holes for installing the single gang boxes. Now, here are my...

How to support a load bearing wall, need engineer, cement wall [ 3 Answers ]

I want to remove about 6 feet from an interior wall. The rafters run parallel with the wall but the reason I think it's load-bearing is because one of the trusses rests on the middle of the wall with a lateral x across it. I have existing pictures and a drawing of "the existing" and what is...

Fasten stud wall to concrete basement wall [ 3 Answers ]

Planning to finishout a basement with stud walls on concrete floor. Planning to use Tapcon fasteners and treated 2x4 for bottom plate. Trying to protect for termites and moisture from the concrete. Thought about using a sill gasket. That would help the moisture but what about termites? I asked...

Installing half wall in load bearing wall [ 3 Answers ]

We are attempting to make our kitchen open concept with our living/dining room by creating either a half wall or putting in a window (what is the correct name for that?) The wall is load bearing. Do we need a permit for that type of reno? What would be a realistic budget to set aside for that...

Hampton bay fan came with wall remote but Fan is not operated from a wall switch. [ 1 Answers ]

I received a New Hampton Bay fan to replace an existing fan. The existing fan is operated by two pull chains. The new fan came with a wall control device. The problem is that the fan is not operated from the wall switch and there are no pull chains. Can I use a Hampton Bay remote with the...


View more questions Search