Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Honda HS35 snowblower starter cord
[ 2 Answers ]
The starter cord came out after a couple pulls. It used to work great. Since the cord not broke there is sufficient cord to use the same cord. I have it all apart and see the spring tightens when I turn it toward the front of the machine. Where do I install the cord and how exactly does it get...
Re-attach cord on tecumseh snow king recoil starter
[ 11 Answers ]
My cord to the recoil starter on my snowblower broke at the base. I have unbolted the starter from the engine and brought it inside. It is looking like I have to take apart the unit just to push the cord into its slot as there is very little finger room to work with. The starter is on an 11...
I can't pull the starter cord on my 10hp Briggs and Stratton Engine
[ 6 Answers ]
I recently purchased a two year old 10 hp Troy Built wood chipper. I've used it for about 4-5 hours and recently had to add a little oil. I added the correct type as per the manufacturers instructions. It started up just fine and after 15 minutes or so I shut it off to empty the bag. Once the...
Weed Eater starter cord replacement
[ 1 Answers ]
I have a Weed Eater model Quantum XM, model # WE986RA with a broken starter cable. I checked your previous answers but I don't see how to get the housing off. It seems to be riveted. It doesn't seem like a good idea to drill the rivits without checking first.
Reassemble Mower starter cord recoil
[ 1 Answers ]
My mower's power cord looked like it was about to break. So I purchased a replacement cord and sought instructions on the web. Unfortunately the instructions I found weren't consistent with the design of the Briggs and Stratton engine on my mower. The instructions show how to replace a coed... View more questions Search
|