Ask Experts Questions for FREE Help !
Ask
    huffman die's Avatar
    huffman die Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 13, 2008, 11:34 AM
    Carb adjustment
    Carb adjustment on 12HP Craftsman II with 40 inch mower and belt length for mower deck?

    <moved from Lawn & Garden>
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Jun 15, 2008, 07:46 AM
    Screw all the way in, and try it at 1 1/2 turns, then adjust in or out to try and make it run.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

10hp briggs carb adjustment [ 1 Answers ]

My snapper mower boggs down when blades are engagued runs good with no load. Have done all the tune up things carb clean twice ,plug,filter, gas , think carb may be out of adjust any suggestions or carb settings. Thanks.

Carb Flooding [ 3 Answers ]

I have a Briggs & Stratton engine on a pull-behind trail mower. Gas seems to just keep flowing into the carburetor. Fuel tank emptied overnight through the carburetor/air-filter assembly. Engine starts when fuel tank is empty and just a few drops of gas in the carburetor. Engine does not start...

No gas to carb [ 1 Answers ]

I got an old mtd riding mower ran about a year ago. Drained all the gas put new and I don't get any to the carb. I blew the line out in to the tank but no gas then I blew from the gas cap got a lot of gas, but when I let off the air the gas stops. What can I try?

Snowblower carb [ 2 Answers ]

I have a toro snowblower I don't know what year it is sometime in the 90s and it won't start due to gummy gas so I need to take the carb off and clean it I never done this before and I was wondering how to take it off and where its located I appreciate it ? ...

View more questions Search