Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Condenser fan motor replacement
[ 3 Answers ]
I have a Rheem heat pump and have purchased a replacement condenser fan motor. It had an Emerson KA55HXPAM-7255 and was crossed over to an A O Smith ORM 1008. My problem is the wiring, the new motor has one more wire than the old one. I had orange, brown, black on the old one. The new one has...
Rheem RACB-030JAS residential A/C unit condenser fan motor replaced
[ 26 Answers ]
I just replaced the condenser fan motor and it initially spun up then stopped, after 10 minutes it ran again then stopped. Now I can hear it buzz then stop but not spin. The original motor was a GE 5KCP39BG K075CS 1/6 HP 1075 RPM 208/230 V its replacement a Dayton 4M205G 1/4 hp 1075 RPM ...
Condenser fan replacement
[ 1 Answers ]
Condenser fan replacement procedure needed...
Rheem Condenser Fan Motor Replacement (Wrong One?)
[ 5 Answers ]
Hi, This is my first time here. I hope someone can help me. My Rheem Home A/C compressor died 6 months before my 10-year warranty expired. I had it replaced and then about a month later my condenser fan motor died. The guy who replaced it installed a Rheem compatible but I just noticed that...
Wiring of a Rheem Condenser fan motor
[ 1 Answers ]
The motor looks to have 2 orange wires, 1 black wire, and 1 brown wire. Where do they go back to. Do the 2 orange wires go to the capacitor? Black go to contact + and brown to common? The 2 orange wires have continuity between them with no or little resistance. Are these both ground wires or... View more questions Search
|