Relay after thermostat before condenser

charlesba Posts: 3, Reputation: 1

New Member

Jun 9, 2008, 03:23 PM

Relay after thermostat before condenser

How do I find out which rlay is blown?

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Jun 9, 2008, 05:06 PM

Where? Model number and brand of unit?

Add your answer here.

Check out some similar questions!

Thermostat relay [ 2 Answers ]

Hi I've been having a/c problems for thelast 3 months in my apartment where the a/c won't cut off when I change the thermostat into the off position. I also notice that it won't cut off when in the auto position as well. To get it to cut off I have to play with the switch from off to heat to off to...

Common wire for thermostat and aquastat relay [ 10 Answers ]

I just purchased a totaltouch P286-1300 which I know is a little bit of over kill for my system, but I like the way it looks. Anyway, I just a simple two wire baseboard gas heating system. When I connect the wires the screen lights up and comes on just fine. When I use the system the thermostat...

Thermostat and relay ? [ 2 Answers ]

I have 2 wire thermostat controlling a window ac using 220 v . I replaces the burnt out 24v transformer . The AC worked but when I turned of the thermostat and then turned it back on the new transformer heated up and stopped working again . I replaced it again and the new one also burnt out . (3...

Thermostat Compressor relay [ 1 Answers ]

An AC technician serviced my unit today and told me my compressor was cycling (turning on and off) too quickly. He suggested I change out my thermostat, which I did last January. I installed a Honeywell RTH 230B. I can't find any info as to whether it has a compressor relay or anything else that...

RTH230B Thermostat A/C Relay Not Working [ 3 Answers ]

I have read several postings on here about this subject, but have not really found the answer to my problem. I am having similar trouble with my relatively new RTH230B Thermostat (Mainly the A/C won't work properly). I installed it this past fall and my gas furnace worked like a charm. However,...