Ask Experts Questions for FREE Help !
Ask
    rfarbe's Avatar
    rfarbe Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 8, 2008, 01:45 PM
    Electric dryer knmore blows cold air
    Have an 18 year kenmore dryer (electric( the blower is fine, no clog in the lint) but blows codl air is it the coils ?
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
    		  
    #2

    Jun 8, 2008, 02:30 PM
    Dear rfarbe

    Either that, or the build-in thermal switch is out. That is : if the drum is rotating.
    Do you have any electrical test tools?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New whirlpool electric clothes dryer / blows a fuse [ 7 Answers ]

I've purchased a new whirlpool electric clothes dryer. It will continue to tumble but one 30 amp tl fuse keeps blowing... no heat. What would cause this fuse to constantly fail?

Furnace blows hot air for 3 min. Then cold for 3 ? [ 4 Answers ]

Furnace blows hot air for about 3-4 min. (burners all firing nicely) then burners go out but air continues to blow (cold) for 3-4 min. All registers are open and the pressure is VERY strong (small house - 6 ports) cycle repeats about every 10 min. or so. Also, what would the black plastic bucket...

Kenmore electric dryer blows fuse after 10 minutes [ 1 Answers ]

Kenmore electric dryer has faint, squeely metallic grinding sound, runs for about 10 minute, then trips the circuit breaker and shuts down. How do I fix that?

Furnace blows cold air [ 3 Answers ]

Yesterday my furnace stopped heating my home. It is 3 years old & I did some minor troubleshooting. The filter is not clogged and the blower is circulating air normally. I checked inside the unit & the ignitor coil is heating and starting the gas jets burning, but they shut off after about 10...

Please help:Furnace still blows cold air... [ 2 Answers ]

Hi again, I posted my situation a few days ago with very little response, so I wanted to follow up again before calling out a technician. I have a Goodman gas furnace, about three years old. It has electronic pilot ignition, which works fine and will enable the burner flame... the problem is the...

View more questions Search