Ask Experts Questions for FREE Help !
Ask
    rajacob's Avatar
    rajacob Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 7, 2008, 07:04 PM
    Low voltage wire for Goodman air condenser
    I have three low voltage wires going to the condenser. Two were pulled out red and black, the third (white or clear coloring) is attached to a red pig tail coming from the controller. A second pigtail from the controller had nothing on it and looks like has never been used although the wire was stripped with no protection over it. This a Goodman condenser so do all three wire tie onto the one pigtail?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 7, 2008, 07:07 PM
    On a strait A/C outside unit you only have two low voltage control wires.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Transformer / how to wire afuse on the low voltage side [ 2 Answers ]

I have a Nordyne model E!EB-015HA furance, transformer burns out after 1 minute .It was suggested by one of your good people (can't find I.D. ) to add an inline fuse to the transformer so thefuse blows and not the transformer. Where do I wire the inline fuse. On the 24 v side or the 240 side, ...

Decrease the voltage between neutral & earthing wire [ 2 Answers ]

How can we decrease the voltage between neutral & earthing wire? Voltage between neutral and earthing is called stray voltage how can we reduce it.

Neutral wire is hot(has voltage potential like the black wire) [ 5 Answers ]

Hi, The problem started at midnight last week. One of my line in the basement is starting to have issue whenever I connect a water pump or appliances to the outlets. Before I plug the appliance in, the neutral is neutral(zero voltage), but when I plug the appliance in, the neutral is now...

Voltage on ground wire? [ 4 Answers ]

Using a volt meter, I get a 120 v reading when touching the neutral wire and the bare ground wire. I get no reading when touching the black hot wire and the white neutral wire. What would cause this? Also, in what circumstances would a black wire and a white wire be connected with a wire...

View more questions Search