Ask Experts Questions for FREE Help !
Ask
    taurusgrl's Avatar
    taurusgrl Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 5, 2008, 07:01 PM
    Working on a furnace/ac
    The heat will will work,but not the ac,I replaced the thermostatbecause the heat would not stay on,so I replaced the thermostat.welll the heat worked great but not the ac any idas??
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 5, 2008, 10:01 PM
    Yes, call a professional before you cause some serious damage to your system.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace is not working [ 2 Answers ]

I have a thermostat that is showing the house to be 60 degrees while it is set for 72. The furnace will not come on when in the auto mode and when switched to on for the blower, Nothing will come on. This is a lennox elite system with a honeywell digital thermostat. Thanks for any help you can...

Gas Furnace not working [ 6 Answers ]

Can use any help... Have an older Carrier Gas Furnace that has gone on the blink. The hall thermostat just stopped working, but only on the HEAT side. (Run the AC just fine.) Was told it was the "thermocupler", so we replaced that, but nothing happened. What else could be wrong? Or should I...

Furnace not working [ 3 Answers ]

I have a Goodman GMP100-4. It does not ignite. I have followed the written instructions and cleaned any debris arount the unit. Suggestions?

Furnace not working [ 1 Answers ]

I have a Intertherm Split System A Frame unit. I turned the furnace on and it came on ran for about 1 min and went off. It did this 3 or 4 times then I turned if off. It was blowing heated air through vents, it just kept shutting off and comeing on every 1 min or so till I turned it off. Now it...

Now furnace not working [ 2 Answers ]

I went back to check my connections, then turned the AC/Furnace on and got nothing .When I went down to the furnace it smeeled like something burned.I can't see any thing but I think I blew it. What do you think ?

View more questions Search