Ask Experts Questions for FREE Help !
Ask
    KentuckyGeo's Avatar
    KentuckyGeo Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 5, 2008, 05:24 PM
    Geothermal unit trouble
    I had a power outtage due to a storm. Our geothermal unit is running but not cooling. I have reset the thermostat and the fan in running, but the temperature is not dropping.
    What's my next step?
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #2

    Jun 5, 2008, 06:38 PM
    Turn the beaker off going to the system for about 10 seconds and then back on, this will reset the control board. If you have a split system geothermal you will have to kill power at the fan coil and compressor unit to get it to reset.
    KentuckyGeo's Avatar
    KentuckyGeo Posts: 2, Reputation: 1
    New Member
     
    #3

    Jun 6, 2008, 06:59 AM
    Thanks I will try that. It's 90 degrees here, so I appreciate the quick response.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Geothermal Unit Compressor Size [ 2 Answers ]

Is it normal that if you look up the compressor information used in a geothermal unit that the compressor rated capacity would be lower then the tonnage rating of the geothermal unit? An example, a friend has a water to air unit, being curious we open one of the service panels to check out the...

Trouble shooting a/c unit [ 2 Answers ]

How do I find out if a capaciter is bad or starter on a/c unit

Trouble shooting malfunctioning central air unit [ 7 Answers ]

Our home utilizes 2 A/C central air units. Downstairs is operationg OK. (Handler and compressor) Upstairs unit (handler) is blowing, no condensation on "shut off valve". No "icing" on coils. COMPRESSOR fan blades did require a "jump start" (I used a stick to start blades turning). However,...

Trouble with carrier AC unit [ 2 Answers ]

could anyone tell me why I my blower fan on my carrier (model#485x-036100331) will not run. It seems that every thing else works fine because the compressor & condenser runs and the coil will frost up. The only thing I found to check was a 5amp fuse. Any suggestions would be greatly...


View more questions Search