 |
|
|
 |
New Member
|
|
May 31, 2008, 06:35 PM
|
|
No cooling!
I have a second heat and air unit on the second floor of my house that I never use. I tried to crank it up today and no cooling! The unit inside and out was on but the temperature stayed at 92 degrees for about 20 minutes, then I turned it off. Any ideas on what I should do, or what the problem could be?
Thanks
So, I tried again this morning. I also tought that maybe 20 minutes in 90 degree temperature was not enough time... The tempstat this morning read 84, so I set the air on 82 to see if anything happened. After 20-25 minutes the temperature was still 84. Air was blowing, didn't seem too cold but neither warm...
I really never use this unit, maybe turned on 5 times in the past 4 years, when it was installed. The question is: does not using the unit hurts it? Since I don't plan to use it, it was installed just for resale value on the house when we finished part of the upstairs, should I get it fixed? Does it sound like an expensive fix to you experts?
Thanks
|
|
 |
-
|
|
May 31, 2008, 07:07 PM
|
|
Dear amcmtipton
First of all : check if the compressor is running and get's hot.
If not running, check the thermostat setting.
If running but not hot, the system has a gasleak (time to get a specialist involved)
Success
|
|
 |
Heating & Air Conditioning Expert
|
|
May 31, 2008, 07:32 PM
|
|
First try the circuit breakers inside and the fuses outside.
|
|
 |
Ultra Member
|
|
May 31, 2008, 09:24 PM
|
|
20 minutes is not very long to see a difference in a 92 degree room. After you determine that everything is working right,check the temp. of the incoming air,, could take a few hours to cool down a very hot area,even when everything is working right
|
|
 |
New Member
|
|
Jun 1, 2008, 06:33 AM
|
|
So, I tried again this morning. I also tought that maybe 20 minutes in 90 degree temperature was not enough time... The tempstat this morning read 84, so I set the air on 82 to see if anything happened. After 20-25 minutes the temperature was still 84. Air was blowing, didn't seem too cold but neither warm...
I really never use this unit, maybe turned on 5 times in the past 4 years, when it was installed. The question is: does not using the unit hurts it? Since I don't plan to use it, it was installed just for resale value on the house when we finished part of the upstairs, should I get it fixed? Does it sound like an expensive fix to you experts?
Thanks
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Mobile home cooling unit not cooling
[ 1 Answers ]
We recently purchased a couple of mobile homes for rental properties. When we hade them inspected they said everything was in working order. When we moved in a tenet the first thing they complained about was that the a/c was not cooling during the day, but at night it was fine. We sent out a...
No cooling
[ 6 Answers ]
Can someone help me troubleshoot my a/c at home.I replaced the air filter and washed down the outdoor condesor with a hose and still no a/c.I also shut my a/c down for the night thinking that maybe after all the cleaning and also if there might have been any freezing of the pipes that it would have...
No cooling
[ 1 Answers ]
I Just Turned On The Ac For The First Time This Year And The Condenser Is Not Working. No Sounds... dead
Why is he cooling off
[ 3 Answers ]
I've been seeing a guy for 3 months and it has been great, we have a lot in common and enjoy spending time, talking and laughing together, basically, it has been great. However, just recently he seems to be cooling off, he doesn't contact me as often as he did. Nothing has changed as far as I can...
A/c not cooling
[ 3 Answers ]
Hi, I've got a problem with my central a/c not cooling. Both my outside unit and my blower in the attic are running, but I'm not getting cool air.Any ideas? Thanks.
View more questions
Search
|