 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do I find out the pressure of my control box?
I don't know anything about well systems. How do I know what the pressure settings are for my control box. It has no cover on it and I am clueless. I want to make sure my pressure tanks are set to the right setting for my control box.
|
||||
|
||||
|
This is a Square D control box. The usual settings are 20/40 or 30/50. This can be read on the cover. However, if the cover's missing you will have to look at the cut in and cut out point of the pump on the gage. NOTE: A open cover exposes live wires to the touch. This is a hazard and should be corrected. Good luck, Tom
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I live in Oregon, and have a 1998 chevy blazer (2WD).I recently took it the DEQ to get new tags, but upon inspection, they noticed my check engine light was on, so I didn't pass, and they handed me a paper that said, " P0452 Evaporative Emission Control System Pressure Sensor Low Input. What do I...
I'm cosigned with my mom on insurance, and it covered birth control contraceptives that I purchased. Will the insurance let my mom know this? Or is there a way that she could find out? Like does it impose an additional fee or anything? Thank in advance!
I have a 1998 Isuzu Hombre (2wd) 2.2L. My "Service Engine Soon" light came on yesterday. I had the code checked at the local autozone store and it came back with P0452 EVAP Emission Control System Pressure Leak Sensor Low. What does this mean? Also, as an FYI, I had my fuel pump replaced in...
My furnace will not light due to an open pressure swith or limit control switch. How do I check this switch and remedy the problem.
View more questions Search
|
