Ask Experts Questions for FREE Help !
Ask
    nickalex's Avatar
    nickalex Posts: 2, Reputation: 1
    New Member
     
    #1

    May 30, 2008, 05:45 AM
    18 hp Brigs & Straton Mower stalls.
    18 hp Brigs & Stratton, Mower stalls.
    lawnman14's Avatar
    lawnman14 Posts: 37, Reputation: 0
    Junior Member
     
    #2

    May 30, 2008, 10:07 AM
    Check the oil.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #3

    May 30, 2008, 11:46 AM
    Under load?

    High speed?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #4

    May 31, 2008, 07:57 AM
    Okay, so under what conditions does the engine stall?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Oil capacity Briggs and Straton Push mower 4.5 hp [ 4 Answers ]

How much oil do I put in a Briggs and Straton Bolens push lawn mower? Model 11A-084E765 4.5hp Verify- the best type of oil is straight 30 weight, right?

Snapper mower starts and stalls [ 1 Answers ]

I've had issues with this mower starting going back to the end of 2006 when I bought a new battery. The mower would click when I turned the key, but not start. The new battery got me through the rest of that season. When spring came, it wouldn't start, so I used my portable charger to jump start...

Brigs and stratton vanguard engine 18 hp [ 1 Answers ]

My engine froze up, ran out for oil.got it Running again but it stopped abruptly.now it will not start .it turns over easily.pulled the plug and there is no compressicon.you would think that if ibroke sonthing in the engine,it wouldn't turn over. Any ideas. ...

Changig starter cord for 22", 6HP Brigg&Straton mower [ 1 Answers ]

I need help on where I can get instructions on how changing the starter cord for a 22", 6HP BriggStraton mower.

Murray ride on mower (425014x92a) bogs/stalls [ 1 Answers ]

When engaging the blade to cut, with the throttle on high, the mower comes to a practical stall. To keep it from stalling I have to quickly disengage the blade. I've checked two brake pads and they both release when the blade is engaged and they clamp the belt when disengaged. The belt seems a...


View more questions Search