Ask Experts Questions for FREE Help !
Ask
    waynener's Avatar
    waynener Posts: 4, Reputation: 1
    New Member
    		  
    #1

    May 29, 2008, 06:08 PM
    Reccessed Lighting
    Recessed lighting, are there any norms? I am so confused with all the possible configurations. Can anyone help?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    May 29, 2008, 06:45 PM
    Start by telling us what you want to do.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    May 29, 2008, 07:40 PM
    Its all in the details. Are you working on a one story home or two story, which floor and do they reach an unheated space. Stuff like that will help a great deal.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lighting : T8 & T12 [ 3 Answers ]

What are T8 & T12 mean in lighting?

Top hat lighting [ 1 Answers ]

I am putting up a drywall ceiling in my basement. The support beams are 2by10. The top hat is about 8" above the drywall. On the directions it says leave 3" of space above the tophat for the heat buildup. I only have an inch and a half or two at the most. Can I still do it?

Dj lighting [ 1 Answers ]

I'm a music dj, I have a circuit box with 8 channels that say I can put 10 amps per channel. The box says I can it has a 15amp breaker. The question I'm asking is can I put a total of 80amps since I have 8 plugs?

Lighting [ 2 Answers ]

I apologize in advance for my lack of knowledge. In my basement I currently have a single 20A circuit with 6 lights on it, rated at 150W each, controlled by a single light switch. I'd like to know if its possible to break these lights up without adding circuits. Is it as simple as adding a...

Lighting Help [ 1 Answers ]

I currently have two hanging lights in my office, that both run off the same switch. I would like to change these to one small(3) track light, using the second light box (farthest from the switch). How do I remove the first one? Can I just cap off the wires? Will the switch still control the...

View more questions Search