Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Copper pipe to iron pipe
 [ 2 Answers ]
 How would you connect a 1/2" copper pipe to a 1/2" galvanized iron pipe that has been cut and has no threads? Do I need to re-thread the iron pipe, screw on a brass attachement and solder the other end to the copper? If so, what is the name of the tool use to re-thread the iron? 
Leak in copper pipe
 [ 2 Answers ]
 I have a pin hole in a copper pipe. Does the pile have to be replaced or can the hole be pluggeed withs something? 
Copper to pvc pipe
 [ 7 Answers ]
 We are trying to install a water system in our home and need to know how we go from copper pipe to pvc pipe. 
A/C not cooling, Small Copper pipe COLD and Large Copper pipe room temp.
 [ 4 Answers ]
 I just moved into a newly constructed townhome and the a/c units are of course new. The A/c is not cooling at all. The machine inside turns on as well as the one outside. The inside A/C makes a strange sucking sound kind of like if you were sipping something out of a cup with a straw and you ran... 
PVC to Copper Pipe
 [ 3 Answers ]
 
I am remodeling a bathroom. The existing drain pipe is 1 1/2" copper tubing. What is the best way to connect a 1 1/2" PVC to 1 1/2" copper tubing? View more questions Search 
  |