Ask Experts Questions for FREE Help !
Ask
    1962james's Avatar
    1962james Posts: 1, Reputation: 1
    New Member
     
    #1

    May 26, 2008, 12:25 AM
    Change old thermostat to new one
    I have a old White Rodgers thermostat model # 1f56w444. At the connections the wires are. W, Y, G, RH, jumper to RC, and B
    All the new ones that I have seen have.
    W, Y, G, RH, jumper to RC, but no B
    My question is what is the be wire for and what kind of new digital thermostat can I use.
    Does not have to be the most expensive one I would not like to spend more the $40.00
    And still get a good one.
    Thanks for your time.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #2

    May 26, 2008, 02:46 AM
    If this uses batteries do not need the B. The B is for common wire and not needed on battery thermostats

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat Change [ 1 Answers ]

Recently I remodeled a house and gutted the interior. My son-in-law asked if I wanted to look at the old Honeywell T87 thermostat before he removed it. I told him to remove it, after all, how hard is it to rewire 4 wires. When it came time to install the new digital Honeywell thermostat,...

How to Change my Thermostat [ 2 Answers ]

OK. I currently have a White-rodgers 1F58 thermostat and I want to change it for a digital Programmable T-stat.. On the White-Rodgers the wiring is as follows. 6 wires are used w/ 1 jumper R- Red wire G- Green Wire O- Orange Wire W2- White Wire w/ a Jumper wire to - E C- Blue Wire Y-...

Can I change my thermostat? [ 4 Answers ]

Hi there, We just bought a house with radiant heat. This is our first experience with that type of heating system. It is wired to have 3 different areas in the house with their own thermostats. They're very basic thermostats, and I would like to change them out for digital programmable...

Thermostat change overs [ 1 Answers ]

I am changing from baystat240 to honeywell th8320 thermostats. I don't know where terminals T, X2, and W from baystat to the new honeywell. Can you advise? Thanks


View more questions Search