Ask Experts Questions for FREE Help !
Ask
    Papskins's Avatar
    Papskins Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 18, 2008, 07:57 PM
    Ceiling Fan
    I have either a Hunter or Hampton Bay Ceiling fan without a light fixture. I am trying to install a light kit and having a problem removing the canopy to get at the wiring. How does the canopy disconnect from the ceiling fixture?

    The Model Number is 44DC10
    ac101's Avatar
    ac101 Posts: 463, Reputation: 57
    Full Member
    		  
    #2

    May 18, 2008, 08:13 PM
    Do you know exactly what model fan you have?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    May 19, 2008, 03:38 AM
    Since there are about 1349 different models between those two manufacturers a picture or model number is the only way we will be able to help you.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    May 19, 2008, 07:19 PM
    If it is a Hampton Bay, there is a ring around the top of the canopy that hides the screws.

    If it is a Hunter, it depends on the model.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #5

    May 19, 2008, 07:19 PM
    Stan how did you come up with that number?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling light on makes ceiling fan turn off [ 6 Answers ]

I installed 2 ceiling fans yesterday in two separate and am having the same problem with both. Before I removed the old fans I disconnected 1 wire at a time from the ceiling to see what stopped working. So I think one wire is the neutral and made both light and fan stop working, 1 wire was for...

Water mark with mold on ceiling of 1st floor ceiling [ 4 Answers ]

Hello, I've just noticed a fairly large water mark with mold in the center located on the ceiling of a downstairs closet - I believe the closet sits below an upstairs shower. I'm a new home owner and would appreciate your advice on what sort of questions I need to ask a plumber to resolve...

Ceiling fan wiring, 2 blk, 2 what, 1 red, 1 grn from ceiling [ 3 Answers ]

I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...

Hanging ceiling fan from vaulted ceiling peak [ 2 Answers ]

Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this?

Old-style ceiling box and ceiling fan [ 4 Answers ]

Hi, I'm trying to install a ceiling fan. The present ceiling box (if you can even call it a box) is an very old-style cylindrical black hunk of metal with four holes for the wires and a hole in the center through which there is a 3/8" threaded metal rod which supports the "box". Obviously this...

View more questions Search