Ask Experts Questions for FREE Help !
Ask
    cbartock's Avatar
    cbartock Posts: 6, Reputation: 1
    New Member
    		  
    #1

    May 12, 2008, 09:45 AM
    Furnace pilot
    Gas furnace / pilot goes out after temperature is satisfied.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    May 12, 2008, 12:01 PM
    Could be

    Low pilot gas pressure
    Partially restricted pilot orifice
    Burner air adjustments causing snuff out at end of cycle
    Pilot flame not hitting thermocouple correctly (location of thermocouple in flame not correct)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Gas furnace has an intermittent pilot, pilot lights, furnace tries to start [ 3 Answers ]

Have a 25 plus year old furnace pilot will start when signal sent furnace tries to start makes noise as it tries over and over but will not start. Thanks

Furnace.pilot light [ 1 Answers ]

Our pilot light on our furnace keeps going out.. Does anyone know why?

Pilot on propane furnace [ 2 Answers ]

I can't get the pilot on my prpane furnace to light

Gas furnace pilot trouble. Goes out while furnace is running! [ 1 Answers ]

About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...

View more questions Search