| 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Minimum shower riser height?
 [ 13 Answers ]
 Delta R10000-unws valve e/w dual function themo cartridge: Good day, can someone please tell me what the minimum riser height I can use with this valve and having the top output port (shower head) connected to a hand held shower elbow and the lower port to the tub spout. House pressure is 45 PSI... 
Required height of shower wall?
 [ 2 Answers ]
 I am installing a shower in a corner that will have full height walls on two sides, a short wall on the third, and will be open on the fourth side. I plan to use a "rain" type shower head, and the shower will be about 40 inches square. My question is, how tall do I need to make the short wall to... 
Basement Shower Stall Height
 [ 1 Answers ]
 I am in the process of installing a shower stall in my basement. The bathroom itself is located on a platform about 6 inches high and my plumber said that the shower stall needed to be on a platform 4" high (located on the bathroom platform). As a result the shower will be 10 inches off the... 
Shower stall need height of controls and shower head
 [ 1 Answers ]
 Hi Am building a shower and require the height of the taps and the shower head 
Shower valvw height
 [ 1 Answers ]
 Hi guys, Just about to install my new shower valve but before doing so wanted to check if there's a standard/recommended height. It's a shower valve and head only, no tub spout... Many thanks, Andy View more questions Search 
 |