Ask Experts Questions for FREE Help !
Ask
    kmckay's Avatar
    kmckay Posts: 1, Reputation: 1
    New Member
     
    #1

    May 4, 2008, 06:38 PM
    Clunking bathroom faucet
    I have a slightly older style bathroom sink faucet, the style that you pull the knob up to turn on and adjust left or right for hot and cold. When I push it back down to shut the water off, it makes a clunking sound. Any ideas why and how to fix it? Thanks for the help..
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
     
    #2

    May 6, 2008, 06:36 PM
    It sounds like a moen château, or a price pfister. Simply replacing the cartridge should fix it.
    1-800-pfaucet for price pfister. Moen customer service at 1-800-555-1212 for 1-800 411
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    May 7, 2008, 09:49 AM
    I have a different take on your problem. Sounds like water hammer to me. If it's water hammer charging the cartridge won't help. If your house is under 40 years of age then you have air chambers installed. "Water hammer" happens when you abruptly shut off the water. You have at least 40 pounds of pressure pushing the water flow. The weight of the water hitting a 90 degree bend causes the sound that you hear. We put in air chambers to cushion the hammer much like the shocks on your car.
    Back in the 60's we were required to to put air chambers on all bath lavatories and kitchen sinks. Over time water and condensate built up in them and they must be recharged. First turn off the house at the main house shut off valve. Then open hot and cold faucets at the farthest bathroom to prevent air lock.(This is important.) You will find under each fixture little brass or chrome valves. These are called angle stops. With a small pail held under the angle stop to catch the run off look under the handle of the stop and you will see a nut with the stem running through it. This is called the bonnet packing nut. Put your wrench on it and back it off counterclockwise. Now open the stop and remove the stem and washer assembly, The stop will began to drain. When it has quit draining reassemble the stop and move on to the next one. Do this on each one of your angle stops. There will be six of them in a two bath home. When you are done, close off the faucets you have opened, turn on the water to the house, and give yourself a pat on the back.
    You have just recharged your air chambers and saved yourself a hefty service call bill. Hope this helps you out TOM

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Leaky bathroom faucet [ 1 Answers ]

The plumber wants to charge you for a new faucet and the labor of installation for a simple leak? Don't use him again. He's packing the service call. I take it this isn't a one handled valve and that it's leaking from the spout and not the srem. Why are you taking the stem into a plumbing...

Bathroom faucet [ 6 Answers ]

I would like some advice for choosing a bathroom faucet. I'm a very practical guy. Looks are not important to me. Rather I want something that lasts, is easy for the plumber to repair or fix or work on. I want something that has a good warranty, etc. Can anyone recommend a brand or model that...

Thumping, clunking sound in wall when faucet turned on/off [ 1 Answers ]

We have recently developed a thumping or clunking noise in the wall when water is turned on or off in the lavatory sink (either hot or cold water). The clunk is also heard as the toilet stops filling. With each turn on/off, the clunk happens just once. Any idea what is causing this and what we...

Bathroom faucet [ 1 Answers ]

I didn't have hot water coming through the bathroom sink faucet but through the shower it was fine. I adjusted the water valve under the sink and the water came flowing out now it won't stop when I turn the know on the faucet to the off position. Is it a seal or do I need to have the whole faucet...

Replacing bathroom faucet [ 1 Answers ]

I replaced my bathroom faucet but can't get the water supply line to stop leaking on the hot water side. It's a copper pipe and the cold water side hooked back up with no problems. Please help.


View more questions Search