Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet flange too low used gaskets
[ 6 Answers ]
I read another post that spoke about the toilet flange being about an inch below the new tile floor. My problem is similar to that. We put in a new tile floor that elevated it by the wonderboard 1/4", mortar, and tile. I borrowed a book from the library, okay quite a few books. One of the books...
How do I replace skimmer gaskets?
[ 2 Answers ]
Hello all, Our vinyl pool liner was replaced about 9 months ago ( in-ground 15' X 36' ) and recently, we noticed that the water level drops by about 3 to 4 inches every week. I suspect that the leak is around the skimmers since the water level or leak seems to stop by about an inch above the...
Head Gaskets or crack block
[ 3 Answers ]
I have a 2000 Taurus that was overheated I had water in my oil and water came out of the exhaust Cracked Head or Block.
Frozen pipes - detecting burst pipes
[ 1 Answers ]
Cold side of the kitchen faucet was frozen this a.m. Trickle returned this evening, followed by an immediate drop in hot faucet pressure - then some brownish water - the brownish water lasted 20 seconds - but the pressure is still low 1/3 pressure now and can get both some hot and some cold Have... View more questions Search
|