 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hayward S166T Sand Amount
How much sand should I add to my Hayward S166T Filter? It looks like it says 100 pounds but and added 50 and its half full and I'm afraid if I add the second 50 pounds it will be too full. Should I add the rest or leave it as it is
|
||||
|
|
|
||||
|
I added the 2nd back and it looks fine but now I have a new question, the guy at the pool place said I could use Vaseline for the o-rings but don't Vaseline dry and crack the o-rings?
|
||||
|
|
|
||||
|
No way any petrolium product will break down the rubber gasket!! This is the way some pool companies get you to come back over and over. If you want to lubricate the gaskets use a silicone lubricant only!!
|
||||
|
|
| Question Tools | Search this Question |
Check out some similar questions!
Is there a difference in "Fill Sand" vs. "Paver Sand"? When quoting prices for laying a patio, I'm finding that Paver sand is about 10 times the price. Will Fill sand be sufficient if packed well and laid thick enough?
Hello - all, My son and I are trying to get an H150, back on-line. Jim does the gas work, I watch over his shoulder and annoy him. Any way, All of the switches in the array on the inside panel have been replaced. The pilot light is lit, however, the main gas flow does not kick in to allow...
Is wet-sanding required between coats? I've heard that it's not necessary, and you can spray multiply coats w/just letting it flash dry(what's this/how long)? I sprayed my first coat and it turned out excellent (perfectly smooth), but as soon as I applied my second coat, there was orange peel. ...
What may cause the % recovery of sand or salt to be greater than 100%?
View more questions Search
|
