 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to wire a sollenoid
My sollenid went bad on my Murray mower. My model number is 325007x92. Where am I supposed to hook my wires to? Where does the black wire (ground?* go, where does the starter wire (big red) go, where does the orange wire go (I believe this is from the switch), and where does the small red wire go (for blade?)? Also could someone tell me in what order do they need to be put on and does each one need to have a nut between them when they are hooked up.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a electric stove to hook up in my house that had a gas stove. The electric 50 amp receptacle is already in place from the previous owner. The existing stove “aluminum” wiring goes into the circuit breaker box, but the wiring is cut off inside the circuit breaker box and is too short to...
I have a room that has 2 light switchs to the same light, so it is a 3 wire circuit. I bought a fan with a remote and the wall mounted remote has only 2 wires, how can I connect it? Thanks, Pete
How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?
How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?
Greetings, My home is 3-wire. I bought a Hunter ceiling fan (model 23811). The fan came with a remote assy. That I do NOT want to use... The fan has standard 3-wire connections (black, white, blk&white strip, ground). The remote receiver home-side wiring looks to be for 2-wire (blk and white)....
View more questions Search
|
