 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
373LAV/376CAV Bryant Air Conditioner/Downward Heater
My water pan got too full (I believe) and tripped the switch on me. Someone told me before where and how to reset this thing but I can't find the information. Can anyone tell me again how to reset my air conditioner after the full pan switch shuts 'er down? Thanks!:rolleyes:
|
||||
|
||||
|
If you have a fault with the system you can turn the power off and then back on going to the furnace(breaker) this will reset the control board if nothing major is wrong. But if your drain pan is full of water and the float switch is open you will need to clean the drain to get the water out out so the float switch can close.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My Bryant 373LAV appears locked out. The trouble code is 3 short and 1 long. The trouble code sticker is missing from the blower door. Can anyone identify the code's meaning?
When I put it on auto and heat doesn't work, if I put it on fan and heat it blows cold air only
Hello All, My Bryant gas furnace will not light. It will go through the motions like it wants to run but it never lights, nor does the fan run on the auto setting; only on the manual setting. It is also on some sort of time delay; if the thermostat is set higher than room temp. the furnace...
30 year old Bryant unit heater was working yesterday not today. I have 120 volts to the control box, the 732 pilot is still lit. so I bench tested when cold there is no continuity, after heating I have continuity. I do not know what to check next I do not have a wiring schematic. Any sdvise would...
I have a Bryant 373LAV/376CAV Gas Furnace. I started having a problem with it and can't find the FLASHING LED ERROR CODES anywhere. After reading some of the answer in these forums I'm assuming the LED flashes x times short, then x times long for a 2 digit number. I'm getting a 3 short 3 long...
View more questions Search
|
