Ask Experts Questions for FREE Help !
Ask
    sunnybunni's Avatar
    sunnybunni Posts: 38, Reputation: 2
    Junior Member
     
    #1

    Apr 22, 2008, 10:38 PM
    Installing Q-Base, LAMBDA interface, and microphone
    I installed Q Base on my MAC, and have a LAMBDA recording interface hooked up with a USB cable, and a Shure microphone hooked up to the interface, but I can't get it to work. I have never recorded with a MAC before and I have no idea what I'm doing. Help please!

Check out some similar questions!

Installing shower base [ 6 Answers ]

Tom, I have a new question. In setting a shower base, on concrete, how much mortar should a person spread, just a couple inches around the drain? Or, should it be more than that. Also, what's the deal in the instructions about putting plastic over the mortar? The base wouldn't be stuck down with...

Installing shower base for scratch [ 2 Answers ]

I would like to know how to go about using cement to create a shower base for a shower

Installing a base molding to a wall that has metal stud [ 4 Answers ]

Hello, I am looking for help on installing base molding, and so far everything I have seen tells you to install the molding to the wall by nailing it to the stud. My question is; what happens if the stud in the wall is metal, would that nail hold securely in the metal stud? If not what...

Installing a shower base in the basement [ 17 Answers ]

We bought a home that already had a sewage pump installed in the basement with three drains already installed in the concrete floor that leads to this pump's tank. One was for a toilet (which is covered), another is for a sink (which at present is in use) and the third is a drain pipe (rubber...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.