Ask Experts Questions for FREE Help !
Ask
    mds30092's Avatar
    mds30092 Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 21, 2008, 10:42 AM
    Furnace blower fan will not turn on
    I have a comfortmaker furnace about 15 years old. When I turn the heat on it works just fine the gas comes on and the blower blows warm air into the house. When I turn the air conditioner on the compressor and outside fan come on but the blower in the furnace will not come on. I tried the fan on with the thermostat switch and still no air. I tried another thermostat and still could not could the blower to turn on. I am woundering if it is the control module in the furnace. It's a General 90 model 50A50-110.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Apr 21, 2008, 11:04 AM
    Could be the fan relay if so equipped.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace Blower Fan Won't Turn Off [ 3 Answers ]

Last night I installed a brand new programmable Honeywell to replace my the ancient mercury Honeywell that was on the wall. I have a 20+ year old forced air gas with central air. The side effect has been that the furnace blower will not shut off. Whether the system is in "heat" or "cool" or...

Furnace blower does not turn on [ 1 Answers ]

Blower was working fine until today. Turned thermostat up to 70 degrees and the pilot lit the gas but after maybe a minute or two the blower did not come on and furnace smelled like something was burning maybe because it was too hot because the blower did not turn on. HELP please. Thank You...

Blower for furnace won't turn on [ 2 Answers ]

I have just re-lit my pilot light for the winter. The furnace is turning on with the thermostat set, but the blower isn't. If I put the blower to manual it turns on, but not in the auto setting. What do I need to do?

Furnace blower won't turn on [ 8 Answers ]

I have a Bryant 395C furnace. The blower won't come on even when thermostat fan switch is set to "on." I've verified that I'm getting 24V AC between terminals marked G and C on the furnace. Blower has 3 wires going into circuit board on furnace. These are colored red, black, and white; red is...


View more questions Search