How do I adjust valves on a 18 hp briggs intek engine

Remove valve cover and you can adjust the nut accordingly. Should be .004-.006 or adjust by should. Just don't over tighted. Remove the cover carefully to try to save the gasket.

Huh, I Certaninly Hope That You Placed The Engine At Tdc And Then Turned The Flywheel Another 1/4" On The Compression Stroke. Then Set Both Valves At .005. Good Luck.

I have a 18 hpbriggs engine it needs the valves adjusted I need to know the gap as well as need to know how to.

I need to know what the valve gap is also how to do it.