I just changed the batteries in my Hampton Bay ceiling fan. Now the fan is running and won't respond to the remote control. The remote seems to be working properly. What do I need to do to get the fan and the remote to sync up once again?

I would try turning off breaker for 20? Seconds and back on.
Its quick and easy.
Worse case, verify DIP switches.

Quote:

---

Originally Posted by Stratmando

I would try turning off breaker for 20? seconds and back on.
Its quick and easy.
Worse case, verify DIP switches.

---

Thanks, Stratmando. The DIP Switch codes were out of synch, and, after correcting them, the fan now works!

This is a great website--thanks for responding.

poodlemom

Good Deal.

What are DIP switches?