Hi,

As a new owner of a house with a pool, I have lots of question to ask,

1. I just filled the pool with well water, the water is kind of green. What is reason and what is cure? I added two container (4 gallons?) of 11% chlorine already.

2. Is there automatic water level indicator? I filled the pool with water hose. But what is the regular way to do it?

3. I saw two black caps close to the pool about 10 inch diameter with label water valve. What they are for? They have open and pause switches and apparently were knocked out by lawn mowers. I would like to know the function of the unit.

4. where the water sensor usually located? I noticed a message on Aqualink RS 4 display Water Sensor Shorted.

Thanks so much for your help.

Quote:

---

Originally Posted by xliu63

Hi,

As a new owner of a house with a pool, I have lots of question to ask,

1. I just filled the pool with well water, the water is kind of green. what is reason and what is cure? I added two container (4 gallons?) of 11% chlorine already.

2. Is there automatic water level indicator? I filled the pool with water hose. But what is the regular way to do it?

3. I saw two black caps close to the pool about 10 inch diameter with label water valve. What they are for? They have open and pause switches and apparently were knocked out by lawn mowers. I would like to know the function of the unit.

4. where the water sensor usually located? I noticed a message on Aqualink RS 4 display Water Sensor Shorted.

Thanks so much for your help.

---

Since no professional answered my questions, I would like to answer some of them myself and there may be some lessons others can learn from my mistakes.

1. I should have added the stabilizer first. When I check with a. Mr. Pool person about what I need to add to the pool for the newly filled water, he said just add two containers (totally 5 gallons of chlorine). The water turned to blue shortly and then return to green next day. I brought water to another place and told I need to add stablizer.

2. still no answer

3. my pool has the Paromount automatic cleaning system. There are nuzzles in the pools that circulates water. Those two black caps are paramount water valves.

4. water sensor located on the returning pipes close to the heater and on the Aqua Rite control board in my system.

Hi there,

If your pool is green you have an algae growth - this is a difficult problem to rectify. You need to specifically purchase an algicide to solve this once and for all. Buy the algicide according to the volume of your pool from your local pool supply store. Add the algicide and brush down the walls of your pool thoroughly and leave overnight. The algicide will coagulate the algae in the pool over night pulling the algae together into clumps and falling to rest along the bottom of your pool.

Vacuum the pool the next day. Brush down the walls again and add chlorine shock to your pool. Using your chemical test strips over the next few days add more chemicals as required. If your pool turns green again be sure to brush down the walls right away to assist the filtration system with removing this contaminant. If you continue to experience problems your filter may require service or replacement.

The valves near the edge of your pool are the control valves for your automatic floor cleaner system. These "turbo heads" are hard to find replacement parts for so be sure to keep track of all of the parts if you decide to open them and service them yourself.

If you have an automatic water leveler it will be located along the side of your pool, often close to the skimmer. It has a lid on it like the skimmer and on the inside you will find a float valve much like you would find in a toilet. If you have one of these... you have a water leveler. If you do not then the normal way to add water to your pool is with a garden hose.

The water flow sensor from your aqualink panel will be a wire that is connected into the return pipes for your pool in the mechanical room. It should look like a plastic nipple held in place with a stainless steel hose clamp. It will have a wire running from the clamp and connecting to your aqualink panel.

I hope this information is helpful

Steve Goodale
Serendipity Pools