My cold water once it comes in to the building splits in to three, one to the central heating, one to the tank in the attic and the last to the kitchen. I have water going to the heating and to the attic but none to the kitchen. I have tried all the ways I know for clearing an airlock without success, what else could it be and how would I fix it?

Quote:

---

Originally Posted by eddieb

My cold water once it comes in to the building splits in to three, one to the central heating, one to the tank in the attic and the last to the kitchen. I have water going to the heating and to the attic but none to the kitchen. I have tried all the ways I know for clearing an airlock without success, what else could it be and how would I fix it?

---

Hey Eddy,
Did you remove the aerator from the spout and check the screens? After you get it off turn on the water. Full stream? If that don't get it click on back and we'll go to plan"B".
Good luck, Tom

Tried that, no luck

Quote:

---

Originally Posted by eddieb

Tried that, no luck

---

Now I need the brand name of the faucet, its age and a discription, (one handle or two knobs) so I can instruct you on how to open it up and flush it out. Tom