Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   1990 chevrolet corsica 3.1L keeps stalling (https://www.askmehelpdesk.com/showthread.php?t=93670)

  • May 17, 2007, 07:01 PM
    akomloss
    1990 chevrolet corsica 3.1L keeps stalling
    My 1990 chevrolet corsica 3.1L keeps on stalling. When the car first stalled I was driving to work and at the stop light it just shut down. I restarted it and it start but then when I put it in drive it stalled again and from then it wouldn't start. I had it towed to Midas and the next morning they started it and it worked. They did a diagnostic and said that there's a shortage to do with the starter, so I had my starter replaced. Took it home and still the same problems, it still shut down. I decided to change the ignition coils (the ignition module was changed just 4 months ago) and the car still runs poorly when it does run and then it shuts down again. After the car shuts down, when I restart it, the car does start.

    Would any one have any idea what my problem might be.
    Any help is greatly appreciated.

    Thanks
  • May 17, 2007, 07:08 PM
    TxGreaseMonkey
    Make sure your ACDelco plugs and fuel filter have been recently replaced.
  • May 17, 2007, 07:27 PM
    akomloss
    I'm sorry txgreasemonkey, but I'm unfamiliar with what an ACDelco plugs are. Are you referring to the spark plugs?
  • May 29, 2007, 12:21 PM
    anthony david
    Quote:

    Originally Posted by akomloss
    My 1990 chevrolet corsica 3.1L keeps on stalling. When the car first stalled i was driving to work and at the stop light it just shut down. I restarted it and it start but then when i put it in drive it stalled again and from then it wouldn't start. i had it towed to Midas and the next morning they started it and it worked. They did a diagnostic and said that there's a shortage to do with the starter, so i had my starter replaced. Took it home and still the same problems, it still shut down. I decided to change the ignition coils (the ignition module was changed just 4 months ago) and the car still runs poorly when it does run and then it shuts down again. After the car shuts down, when i restart it, the car does start.

    would any one have any idea what my problem might be.
    Any help is greatly appreciated.

    Thanks

    anthony david

  • All times are GMT -7. The time now is 01:55 AM.