Hi, I'm changing an old analog thermostat for a digital one, can I please have some help connecting the new one? My A/C is a Trane electric.


Robertsahw D34000
The old one wiring was:
Robertshaw D34000
Red-Rc
Yellow-Y and W
Green-G
Orange-O
White-Y
Attached is a picture of the old wiring
The new one:
Honeywell RTH230B
This one just have this terminals:
Rh Rc W Y G

Follow this link it will tell you everything you need to know about your new tstat.

http://customer.honeywell.com/techli...0s/69-1800.pdf

All the answers should be in this documentation

Hi, thank you very much for your answer.
The link is for the instalation guide, which I have.
I already connected the wires as the letters on the guide but the cooling does not work.
I didn't conect the white wire, does this matters?
Any help will be highly appreciated.
Thanks

You have to connect the white wire. You may note at the beginning of this board there are sticky notes and they have much information on Thermostat replacement. You might check there for more answers.